How To Access Ip Camera

Accessing the IP Camera

This affiliate explains how to access the IP camera through web browsers and RTSP players.

This chapter includes these topics:

• Using Spider web Browsers
• Performing the Initial Setup of the IP Photographic camera
• Using RTSP Players
• Using 3GPP-Compatible Mobile Devices

Using Web Browsers

To access the camera, follow these steps:

---

Step 1 Launch your spider web browser (Microsoft Net Explorer Mozilla Firefox).

Step two Enter the IP address of the camera in the accost field and then press Enter.

Alive video is displayed in your web browser.

If it is the first time installing the camera, a dialog box prompts for data. Follow the instructions to install the required plug-in on your figurer.

Stride three If you run into a dialog box indicating that your security settings prohibit running ActiveX Controls, enable the ActiveX Controls for your browser:

a. Choose Tools > Internet Options > Security > Custom Level.

b. Expect for Download signed ActiveX controls, select Enable or Prompt, and then click OK.

c. Refresh your web browser, then install the ActiveX command. Follow the instructions to complete installation

 

---

Note ● The camera utilizes 32-bit ActiveX plugin. Y'all cannot open up a management/view session with the photographic camera using a 64-bit IE browser.

• If you encounter this trouble, endeavour execute the Iexplore.exe programme from C:\Windows\SysWOW64. A 32-bit version of IE browser will exist installed.
• On Windows vii, the 32-bit explorer browser can be accessed from hither: C:\Program Files (x86)\Net Explorer\iexplore.exe.

 

---

Tip The onscreen Coffee command tin can malfunction nether the post-obit situations: A PC connects to different cameras that are using the aforementioned IP address (or the same camera running different firmware versions). Removing your browser cookies will solve this problem.

If yous encounter issues with displaying the configuration menus or UI items, try disabling the Compatibility View on Internet Explorer viii or 9.

You may too printing the F12 cardinal to open the developer tools utility, and so change the Browser Fashion to the 18-carat Cyberspace Explorer 8 or nine mode.

In the effect of plug-in compatibility issues, you may attempt to uninstall the plug-in that was previously installed.

Performing the Initial Setup of the IP Camera

After you lot install IP camera or after you perform a manufactory reset procedure, you must access the IP photographic camera and brand initial configuration settings. These settings include root passwords, and whether the IP camera tin exist accessed through an HTTPS connection in improver to the default HTTP connexion.

By default, when the IP camera powers on, it attempts to obtain an IP address from a DHCP server in your network. If the camera cannot obtain an IP address through DCHP, an IP address is assigned using the Link-Local address scheme. The camera acquires an IP address past inserting function of its MAC address into the 169.254.x.x IP accost. To do this, the camera converts the hex digits of the MAC address to decimal values and so applies them to create an IP accost in the following format:

169.254.MAC:nine-10.MAC:eleven-12

where MAC:9-10 are the 9th and 10th digits in the MAC address, and MAC:11-12 are the 11th and 12th digits.

For example, using this method, camera with a MAC address of 00-11-22-33-44-55 acquires an IP address of 169.254.68.85, given that hex 44 = 68 decimal and hex 55 = 85 decimal.

To connect to the IP photographic camera for the offset time and make initial configuration settings, perform the following steps:

---

Step i Start Internet Explorer, enter HTTP:// ip_address in the address field, and press Enter.

Replace ip_address with the IP address that the IP camera obtained through DHCP or, if the camera was unable to obtain this IP address, enter 169.254.x.x as obtained past camera.

The Configure countersign window appears

Step two In the Password and Ostend Password fields, enter a password for the IP photographic camera root user.

Footstep 3 Enable / disable HTTPs bank check box as required.

Step 4 Click Save.

 

Using RTSP Players

To view the streaming media using RTSP players, you tin can use one of the following players that support RTSP streaming.

• Quick Fourth dimension Player
• VLC media player

---

Step 1 Launch the RTSP player.

Stride 2 Choose File > Open URL. A URL dialog box will popular up.

Pace 3 The address format is rtsp:// ip_address : rtsp_port / RTSP_streaming_access_name_for_stream1_or_stream2.

Every bit most ISPs and players only allow RTSP streaming through port number 554, set the RTSP port to 554. For more data, see the "RTSP Streaming" section.

Footstep 4 The alive video will exist displayed in your player.

For more information virtually how to configure the RTSP access proper name, see the "RTSP Streaming" section.

 

Using 3GPP-Compatible Mobile Devices

To view the streaming media through 3GPP-compatible mobile devices, brand sure the photographic camera tin can be accessed over the Internet. For more information on how to fix the camera over the Net, meet the "Network Deployment" section on folio 1-nine.

To utilize this feature, practice the following on the photographic camera:

---

Pace one Because most players on 3GPP mobile phones do not support RTSP hallmark, make sure the authentication style of RTSP streaming is set to disable. For more than information, meet the "RTSP Streaming" section.

Step two Equally the bandwidth on 3G networks is express, you will not be able to use a big video size. Set up the video streaming parameters as follows. For more information, see the "RTSP Streaming" department.

• Video Way—H.264
• Frame Size—176 X 144
• Maximum frame charge per unit—5 fps
• Intra frame period—1S
• Video quality (Constant bit rate)—40kbps

Pace 3 Equally near ISPs and players only let RTSP streaming through port number 554, set the RTSP port to 554. For more information, see the "RTSP Streaming" department.

Footstep 4 Launch the player, such as QuickTime, on the 3GPP-compatible mobile devices.

Pace 5 Type the following URL commands into the thespian. The address format is rtsp://public_ip_address_of_your photographic camera:rtsp_port / RTSP_streaming_access_name_for_stream_#_with_small_frame_size_and_frame_rate.

For example:

rtsp://192.168.10.15:554/live2.sdp

You can configure Stream #2 into the suggested stream settings as shown above for alive viewing on a mobile device.

 

Source: https://www.cisco.com/c/en/us/td/docs/security/physical_security/video_surveillance/ip_camera/8000_series/ref_guide/8020_8030/8020_8030_ref_guide/accessing.html

Posted by: johnsonsefuldsider1981.blogspot.com

Share this post